عربي
HiTEC HS-7985MG Digital Servo
Availability:
In stock
SKU
10236
was
KWD 22.00
Special Price
KWD 7.50
Share On
The new HS-7985MG High Torque Digital Servo has the added benefit of Hitec's new G2 second generation programmable digital circuit. This circuit has twice the resolution of our original circuit while adding programmable overload protection. The technology doesn’t stop at the circuit board, with a high performance coreless motor, dual ball bearing supported output shaft, bushing supported gear shafts and Hitec's Heavy Duty Metal gear train the HS-7985MG was designed to withstand the stress of larger high performance aircraft and on/off road vehicles.
Programable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points
- Resolution (default is set at high)
- Overload Protection (default is off)
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points
- Resolution (default is set at high)
- Overload Protection (default is off)
SPECS.
| Dimensions | 1.57" x 0.78"x 1.45" (40 x 20 x 37mm) |
| Product Weight | 2.18oz (62g) |
| Output Shaft Style | 24 tooth (C1) spline |
| Voltage Range | 4.8V - 6.0V |
| No-Load Speed (4.8V) | 0.16sec/60° |
| No-Load Speed (6.0V) | 0.13sec/60° |
| Stall Torque (4.8V) | 144oz/in. (10.4kg.cm) |
| Stall Torque (6.0V) | 172oz/in. (12.4kg.cm) |
| Max PWM Signal Range (Standard) | 750-2250μsec |
| Travel per µs (out of box) | .075°/μsec |
| Travel per µs (reprogrammed normal res) | .130°/μsec |
| Travel per µs (reprogrammed high res) | .075°/μsec |
| Max Travel (out of box) | 113° |
| Max Travel (reprogrammed normal res) | 195° |
| Max Travel (reprogrammed high res) | 112° |
| Pulse Amplitude | 3-5V |
| Operating Temperature | -20°C to +60°C |
| Current Drain - idle (4.8V) | 3mA |
| Current Drain - idle (6.0V) | 3mA |
| Current Drain - no-load (4.8V) | 200mA |
| Current Drain - no-load (6V) | 240mA |
| Current Drain - stall (4.8V) | 2A |
| Current Drain - stall (6V) | 3A |
| Continuous Rotation Modifiable | Yes |
| Direction w/ Increasing PWM Signal | Clockwise |
| Deadband Width | 2µs |
| Motor Type | Coreless Carbon Brush |
| Potentiometer Drive | 6 Slider Indirect Drive |
| Internal Feedback Style | 5KΩ Potentiometer |
| Output Shaft Support | Dual Ball Bearing MR106 |
| Gear Type | Straight Cut Spur |
| Gear Material | 3 Metal, 1 Metal Karbonite Gear |
| Wire Length | 7" (178mm) |
| Wire Gauge | 22AWG |
Write Your Own Review
