HiTEC Standerd Servo 325
- Availability: Out of stock
- Product Code: 10239
-
5.000 KD
Related Products
HITEC D940TW D/SERVO
The titanium gear D-940TW is part of Hitec’s D-Series dynamo servo line. All Hitec D-Series servos h..
45.000 KD
HITEC D945TW D/SERVO
Product DescriptionThe titanium D-945TW is part of our D-Series servo line. All Hitec D-Series servo..
46.000 KD
HITEC D950TW D/SERVO
Product DescriptionThe titanium D-950TW is part of our D-Series servo line. All Hitec D-Series servo..
47.500 KD
HITEC D980TW D/SERVO
Product DescriptionThe titanium D-980TW is part of our D-Series servo line. All Hitec D-Series servo..
49.000 KD
HITEC DPC-10 SERVO
Product DescriptionThe DPC-10 BLDC Programming Software gives the user of Hitec brushless servos the..
4.500 KD
HITEC HS-225mg Mini Servo
The analog HS-225MG represents a good value with performance that rivals other larger and more expen..
10.000 KD
HITEC HS-5646WP D/SERVO
This product has been discontinued and replaced by the D646WP servo. Hitec's wa..
19.500 KD
HITEC HS-7775MG D/SERVO
Product DescriptionThe HS-7775MG low profile digital coreless servo features our latest G2 digital c..
24.000 KD
HiTEC 5084MG Micro Gyro Servo
SpecificationsModulation:DigitalTorque:4.8V: 21.00 oz-in (1.51 kg-cm)6.0V: 26.00 oz-i..
17.500 KD
Product
Description
The HS-325HB Standard
Heavy Duty Servo features a ball bearing output shaft for long life and
positive centering. Hitec’s HS-325HB is offered with Karbonite™ gears, that
after hundreds of thousands of cycles won’t show any signs of wear. With 49
oz./in. of torque at 6 Volts, the HS-325HB is a great choice for Sport pilots
all over the World!
Applications: Heli's and
Aircraft up to 72" or up to 12lbs when using just one servo per control
surface.
Note: Be aware that high
vibration gas (not glow) engines combined with large contol surfaces and large
thows (3D models) can put undue strain on the gears. Metal geared servos are
recommended for these applications even if under 12lbs.
Warning: Do not use
thread lockers on Karbonite geared servo as it will cause the output shaft to
fail.
Features
Economical, Ball
Bearing, Sport Servo
Tough Karbonite Gears
Ball Bearing-Supported
Output Shaft
Specifications
| Motor Type: | 3 Pole |
| Bearing Type: | Top Ball Bearing |
| Speed (4.8V/6.0V): | 0.19 / 0.15 sec @ 60 deg. |
| Torque oz./in. (4.8V/6.0V): | 42 / 51 |
| Torque kg./cm. (4.8V/6.0V): | 3.0 / 3.7 |
| Size in Inches: | 1.57 x 0.78 x 1.43 |
| Size in Millimeters: | 39.88 x 19.81 x 36.32 |
| Weight ounces: | 1.51 |
| Weight grams: | 42.81 |