• Phoenix Model Super Cub PA-18 30cc Gas/EP ARF 107
  • Phoenix Model Super Cub PA-18 30cc Gas/EP ARF 107

Phoenix Model Super Cub PA-18 30cc Gas/EP ARF 107

  •  
  • Brand: Phoenix
  • Availability: In Stock
  • Product Code: 15063
  • 155.000 KD

 

FEATURES

 

Construction: Laser cut balsa and light plywood

Wing: 2 piece wall wood construction, ailerons pre-installed,

aluminum wing joiner

Aileron and Flap Control: Dual servo

Covering: Hangar 9 UltraCote

Radio Compartment: Plywood reinforced

Cowl Pre-painted Fiberglass

Canopy: Clear with painted-on frame lines

Landing Gear: Scale shock absorbing steel main gear,aluminum tail

gear

Wheels: Two 4.25 (108mm) foam main, one 1 (25mm) tail wheel

Fuel Tank: Approximately 16oz (473cc)

Motor Mount: Three plywood plates with aluminum standoffs

Engine Mount: Plywood with aluminum standoffs


 

INCLUDES

ARF Super Cub 30cc Airplane with Landing Gear, Wheels, Fuel Tank,

Instrument Panel, Decals, Pilot, Instruction Manual

 

REQUIREMENTS

For Gasoline Operation

Engine: 30cc 2stroke

 

For Electric Operation

Brushless Motor: Rimfire 1.60

ESC: 120-160A

LiPo Battery: 12S up to 5000 - 6000mAh (not carried)

LiPo Charger: To match selected battery

Propeller: 18x8 E APC

 

Radio: 6-channel

Servos: Eight standard high-torque (2-aileron 2-flap 2-elevator

1-rudder 1 throttle)

Y-Harness: For ailerons

Receiver Battery: 6V NiMH, at least 2400mAh

Misc. Items: 14 foam rubber padding, medium fuel tubing,

propeller, building and field equipment.

 

SPECIFICATIONS

Wingspan: 107 (2720mm)

Weight: 19 - 20lb (9 - 9.5kg)

Length: 68.6 (174.2m)

Wing Area: 1705 sq in (110 sq dm)

Wing Loading: 26.54 oz sqin (81 sqdm)

Wing Type: NACA Airfoil

Servo Mount: 0.83 x 1.6 (21 x 42mm)

Center of Gravity: 4.3 (109mm) Back from the wings leading edge

measured at the fuselage

Control Throws- High Rate Low Rate

Elevator: 0.39 (10mm) 12 expo 0.47 (12mm) 12 expo

Rudder: 1.2 (30mm) 15 expo 1.6 (40mm) 15 expo

Ailerons: 0.39 (10mm) 10 expo 0.47 (12mm) 10 expo

Control Throw Flap: mid, (15mm) down, landing 20mm down

 

COMMENTS

If a replacement fuel tank is needed the DuBro 16oz Fuel Tank

DUBQ0216 can be used. Some trimming and modification may be

required when installing any aftermarket fuel tank.

 

Following are the colors of Hangar 9 UltraCote used, and order

number for 6 rolls:

White, HANQ1122

True Red, HANQ1118