Related Products
The titanium gear D-940TW is part of Hitec’s D-Series dynamo servo line. All Hitec D-Series servos have been designed using their cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU, and a 12-bit ADC for unprecedented programmability and flexibility. These servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with an M3 pan head with a phillips drive style, each D-Series servo brings monster performance never known before in the market.
Special Features:
- Wide Voltage Range: DC 4.8-8.4V
- 2 cell Li-Pi (6 cell Ni-MH) compatible
- Programmable digital amplifier with MOSFET drive
- Gold plated connector
- Narrow dead band width & high standing torque
- Applied H25T horn gear
- 3mm horn screw (‘+’ & HEX socket screw included)
- 32bit MCU / 12bit ADC
- Durable titanium alloy metal gears with dual ball bearings
- Ultra hardness gear shaft with 3 axial metal bushing
- Heat sink for motor
- Water & dust resistant (splash proof)
Dimensions | 1.57” x 0.79” x 1.50” (40 x 20 x 38mm) |
Product Weight | 2.40oz (68g) |
Output Shaft Style | 25 tooth (H25T) spline |
Voltage Range | 4.8V - 8.4V |
No-Load Speed (4.8V) | 0.11 sec/60° |
No-Load Speed (6.0V) | 0.08 sec/60° |
No-Load Speed (7.4V) | 0.07 sec/60° |
Stall Torque (4.8V) | 138.87 oz/in. (10.0 kg.cm) |
Stall Torque (6.0V) | 187.48 oz/in. (13.5 kg.cm) |
Stall Torque (7.4V) | 229.14 oz/in. (16.5 kg.cm) |
Max PWM Signal Range (Standard) | 750-2250μsec |
Travel per µs (out of box) | .080°/μsec |
Max Travel (out of box) | 120° |
Pulse Amplitude | 3-5V |
Operating Temperature | -20°C to +60°C |
Continuous Rotation Modifiable | Yes |
Direction w/ Increasing PWM Signal | Clockwise |
Deadband Width | 2µs |
Motor Type | Coreless |
Internal Feedback Style | 5KΩ Potentiometer |
Output Shaft Support | Dual Ball Bearings |
Gear Type | Straight Cut Spur |
Gear Material | Titanium |
Wire Length | 11.81" (300mm) |