HEX Tronik DT700 700KV
- Availability: In Stock
- Product Code: 12041
-
8.500 KD
Related Products
H.K Motor P.D 28-36 1200KV
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, c..
12.000 KD
H.K Motor P.D 42-48 650kv
PROPDRIVE v2 motors are designed to perform right out of the box with tight windings, smooth bearing..
22.000 KD
HB DONKEY ST3007-110KV
When pulling power matters and looks.. well.. just dont, then the HobbyKing Donkey ST3007 is the wor..
10.000 KD
Looks can be deceiving. This outrunner is around twice the size of a towerpro bell motor, and swings a much larger prop. Its the motor used on some of Art-techs new plane kits, which is testiment to its durability, ease of use and quality.
The DT700 will swing an 11x4.7 SF prop nicely, to produce more than 900g of thrust.
Its great for larger GWS foamies or parkfly planes.
Spec.
Required Voltage: 11.1v
Suggested Battery Capacity: 1300mAh +
Suggested Prop: 10x4.7, 11x3.8 or 11x4.7
Max current draw: 13A (with 11x4.7 prop)
Max thrust: 900g+
No Load Current: 1.2A
Shaft: 4M (perfectly suited to Towerpor/GWS SF Slow Fly props)
Weight: 78g
Diameter: 41mm
Overall length: 77mm
Kv: 700rpm/v
Comes with mount as shown in Image
Test Report.
We used this outrunner to power the an Art-tech Pitts. Run with a 1300mAh 3S1P 20C pack, 18A BESC and 1147 GWS/Towerpro prop, the Art-tech pitts ran nicely. Excellent climb rate, though not hoverable, and with 13minute flight times or more, we were very impressed.
A very efficient outrunner for slower flying models of up to .15 size.
The DT700 will swing an 11x4.7 SF prop nicely, to produce more than 900g of thrust.
Its great for larger GWS foamies or parkfly planes.
Spec.
Required Voltage: 11.1v
Suggested Battery Capacity: 1300mAh +
Suggested Prop: 10x4.7, 11x3.8 or 11x4.7
Max current draw: 13A (with 11x4.7 prop)
Max thrust: 900g+
No Load Current: 1.2A
Shaft: 4M (perfectly suited to Towerpor/GWS SF Slow Fly props)
Weight: 78g
Diameter: 41mm
Overall length: 77mm
Kv: 700rpm/v
Comes with mount as shown in Image
Test Report.
We used this outrunner to power the an Art-tech Pitts. Run with a 1300mAh 3S1P 20C pack, 18A BESC and 1147 GWS/Towerpro prop, the Art-tech pitts ran nicely. Excellent climb rate, though not hoverable, and with 13minute flight times or more, we were very impressed.
A very efficient outrunner for slower flying models of up to .15 size.
- Kv(rpm/v)700.00
- Max Current (Motor) (A)13.00
- Resistance (mh)0.09
- Max Voltage (V)13.00
- Power (W)270.00
- Shaft A(mm)4.00
- Length B (mm)38.00
- Can Diameter C(mm)40.00
- Can Length D(mm)10.00
- Total Length E(mm)78.00
