Related Products
Quality Dual Wireless
Microphone SYNCO G2(A2)
The SYNCO G2(A2) is a
dual wireless microphone. It comes from G1(A2) and is reborn with a display to
show all main indicators. It continues processing the input audio via patented
technology and sending clean, clear audio based on 2.4GHz digital transmission
technology. With 1 receiver and 2 transmitters, G2(A2) records two sound
sources at the same time, applicable to a wide range of content creations.
New TFT Display &
One More Transmitter Make G2(A2) a Well-deserved Plus
The SYNCO dual wireless
microphone system G2(A2) distinguishes itself from G2(A1) by having the other
transmitter to achieve the recording of 2-person dialogue and the flexibility
of output modes, and differs from G1(A2) by a true-color TFT display on both
transmitter and receiver to make each key figure such as recording mode and
battery status, readable under different light intensities.
Algorithm 2.0 Enhances
Transmission of Stability & Security
The SyncoderTM Encrypted
Transmission Algorithm 2.0 enhances the signal stability of the digital
microphone system within 492ft/150m (Line-Of-Sight) and 164ft/50m
(Non-Line-Of-Sight) effective range. It runs the Frequency Hopping Spread
Spectrum (FHSS) technique to detect the location on it’s own intuitive and then
by itself turns to the optimal frequency so that no signal conflicts would
occur. This also helps protect privacy and reduce interference.
Integrated Signal
Processing Brings Little Latency Output
The Digital Signal
Processor (DSP) chip in the professional dual wireless microphone system optimizes
the signal from input to output directly. The full synchronization of signal
capture, processing, and delivery is a guarantee of the almost zero latency
transmission and quality sound production, perfect for immediate use and great
for live broadcast.
3-in-1 Quick Charging
Supports Each Continued Recording
The 3-in-1 charging
solution allows the charging of this 2 channel wireless microphone (2TX+1RX) at
the same time with one power source. It takes only 40 min to get the system 50%
powered and 1 hour to reach 80%. The capacity-expanded battery supports 8-hour
continued working if fully charged.
Small Features Run to
Make Big Differences
A button is set to mute
the system for a while when it comes to team communication, device setup, etc.,
rather than completely turning off the system. Find this function also in mini
wireless microphone G1T/L.
The low cut, gain
control, and real-time monitoring function to give a wider range of adjustment,
allowing the microphone system to work in more conditions.
Pocket Mic Gets
Invisible but Audible Effect
Mobile content creators
would like this dual channel wireless microphone system. The transmitter and
receiver each weighs only 39g and is 52*42*17mm sized, very easy to be
concealed and very inconspicuous in most recording scenarios.
Specifications
Transmitter
(TX )
Wireless Transmission Digital
2.4GHz
RF Frequency Band 2400-2483.5MHz
Frequency Response 20Hz-20KHz
Working Distance 492ft/150m
(LOS area) / 164ft/50m (NLOS area)
Mounting Pocket Clip
Audio Input 1/8" /
3.5mm TRS Mic Input
Audio Input Level 1V
(0dBV)
Power Requirements 3.3V-4.7V
Battery Type Built-in
Lithium Battery, 500mAh
Battery Charging Time 1.5h
Battery Life 8h
Display TFT Screen
Dimensions 52×42×17mm
Material Plastic
Weight 39g
Receiver (RX)
Wireless Transmission Digital
2.4GHz
RF Frequency Band 2400-2483.5MHz
Approximate RF
Sensitivity -81dBm
Working Distance 492ft/150m
(LOS area) / 164ft/50m (NLOS area)
Mounting Pocket Clip
Number of Audio Channels
2
Audio Output 1/8” /
3.5mm TRS Mic Output , 1/8“ / 3.5mm TRS
Headphone Output
Gain 0-5 Level
Audio Output Level Line
Out: 1V; Monitoring: 25-30mW
Power Requirements 3.3V-4.7V
Battery Type Built-in
Lithium Battery, 500mAh
Battery Charging Time 1.5h
Battery Life 8h
Display TFT Screen
Dimensions 52×42×17mm
Material Plastic
Weight 39g
Microphone
Form Factor Built-in/External
Mic
Sound Field Mono
Polar Pattern Omnidirectional
Frequency Range 50Hz-20KHz
Sensitivity -40dB (±3
dB, re 1V/Pa at 1KHz)
Max. SPL 135dB SPL (at
1KHz)