Related Products
Camera Mic SYNCO M2S
SYNCO Mic-M2S is a
camera mic launched for outdoor shooting particularly. Its 100Hz high-pass
filter is easily switchable to cut down ambient noises, its SNR is set at 76dB
to restore as many signal details as possible; its 32g-weighed metal
construction isolates RF interference without adding heft to the rig; its 4-day
long working life is ample for continued shooting...This camera microphone is
perfectly suitable for mobile journalists, speakers, vloggers, and run-and-gun
shooters.
Sound Performance
Ensured
The 100Hz switchable
high-pass filter rolls off ambient noises such as current sound and airflow
noises; the 76dB relatively high SNR restores the signal details as many as
possible; the metal construction locks out RF interference. All this cuts down
on those destroying the recording and improves the sound performance.
Working Status Shown
The LED indicator is
intended to simplify the use of this microphone for camera. It turns “green”
when the microphone is power-on and “blue” if the high-pass filter is on. Just
focus on your shooting and keep yourself away from any chaotic operation.
Varied Devices Allowed
The 32g light and small
device fits on the camera securely using a cold shoe or 1/4”screw hole, adding
no weight to the small mobile device and never hindering your movement. The
3.5mm TRS/TRRS cables allow the camera shotgun mic to directly connect to most
3.5mm input DSLR cameras, recorders, smartphones, etc.
Outdoor Shooting Suited
Just 1 AAA alkaline
battery is needed to support 90-110 hours (= about 4 days) continued working of
the SYNCO M2S. The included wind muff and shock mount made of silicon rubber
help minimize the air interference and mitigate unwanted shocks and vibrations.
All this makes it the best camera mic for outdoor shooting.
Specifications
Transducer Electret Condenser
Frequency Respons 35Hz-18KHz
Dynamic Range (Typical) 90dB
Signal/Noise 76dB
Maximum SPL 120dB
Sensitivity -35dB±3dB/ 0dB=1V/Pa,1KHz
Power Requirement AAA Battery x 1
Output Connector 3.5mm TRS
Battery Life 100h
Dimensions (L x Diam) 90×20.5mm
Weight 32g
Features
For YouTube, TikTok,
Vlogs, and Videos
Switchable High-Pass
Filter at 100 Hz
Cardioid Pickup for Less
Background
Lightweight & Tough
Metal Construction
Shockmount with Cold
Shoe and 1/4"-20
3.5mm TRS & TRRS
Cables for Camera/Phone
Foam Windshield Included
100 Hours on Single AAA
Battery
The Synco Mic-M2S is a
camera-mount microphone specifically designed for outdoor use and well suited
for vlogs, YouTube, TikTok, and similar video applications. The mic features a
rugged, yet lightweight, metal chassis and a switchable high-pass filter to reduce
low-frequency rumble and wind noise.
The Mic-M2S can operate
for up to 100 hours on a single AAA battery and includes a silicon rubber
shockmount that isolates the mic from handling noise. The shockmount features
both a cold shoe mount and a 1/4"-20 threaded hole for mounting to
cameras, stands, and boompoles.
The capsule's cardioid
polar pattern focuses audio capture in front of the microphone for less
background sound, resulting in improved audio quality for your videos,
especially when compared to the omnidirectional mic built into a camera or
phone.
An LED indicator glows green when the mic is powered on and blue when the 100 Hz low-cut filter is engaged. The foam windscreen helps to reduce wind noise, and two 3.5mm connecting cables are also included: a TRRS cable for smartphone use and a TRS cable for camera use. A carry pouch is also supplied to hold the mic and accessories.
Specifications
Transducer Electret Condenser
Frequency Respons 35Hz-18KHz
Dynamic Range (Typical) 90dB
Signal/Noise 76dB
Maximum SPL 120dB
Sensitivity -35dB±3dB/ 0dB=1V/Pa,1KHz
Power Requirement AAA Battery x 1
Output Connector 3.5mm TRS
Battery Life 100h
Dimensions (L x Diam) 90×20.5mm
Weight 32g