Related Products
SebArt Mini
BAe Hawk T1 1,42m ARF
Sebart fiberglass mini Jet
with electric retracts, gear doors and corresponding servos and sequencer, as
well as all accessories. Designed for 90mm EDF or P20-30N jet turbine.
The all new Mini BAe Hawk
Jet ARF was designed by Italian aerobatic pilot Sebastiano Silvestri. This
sport ARF jet-model design is based on real aircraft design and added the
ultimate aerodynamically ideas of the modernst pattern models, using the 15
years experience in flying jets of Seba.... the result is surprising
This innovative design
combined with the lightweight structure, the fiberglass fuselage and all wood
airframe wings and stabs, give the Mini MB-339 Jet ARF an impressive precision
and smoothness at any airspeed and flight condition. Thanks of his low wingload
and the powerfull 90mm EDF or the P20-K30 turbine, it can be a fantastic
aerobatic jet-trainer… let you surprise from your new Mini BAe Hawk Jet ARF
Features
Painted fiberglass
fuselage
Wing Span: 1420mm / 55.9in
Length: 1400mm / 57.08in
Wing area: 32dm² / 496sqin
Weight (without battery):
3kg / 105.82oz
Flying weight: 3.85kg /
135.80oz
Wings and stabilizers in
balsa covered with Oracover
Retract aluminium landing
gear + doors installed
Includes
SebArt Mini BAe Hawk T1
1,42m
2x servos 12g for electric
retract landing gear with doors sequencer (included)
1x servo 12g for front
steering landing gear (included)
Manual in English
Requires
1x 90mm EDF and motor
1x ESC
Minimum 6 channels radio
and receiver
7x sub micro servos 17g
(1x rudder, 2x elevator, 2x ailerons, 2x flaps)
5000-5800 mAh 35-50c Lipo
Battery 6 cells
Lipo Battery Charger 6
cells
Estimated build time is 16
hours
Can also be equipped with
a P20-30 Jet turbine with the "Turbine Kit" (available on demand)
Wingspan (mm): | 1420mm / 55.9in |
Length (mm): | 1400mm / 57.08in |
Weight (gr): | 3kg / 105.82oz |
Flying weight (gr) | 3.85kg / 135.80oz |
Wing Surface Area: | 32dm² / 496sqin |
CG (Center of Gravity) | Check manual |
Servos | 3x servos 12g / 0.02lb |
EDF Diameter Class (mm): | 90 |
Surfaces | Ailerons, Rudder, Elevator, Flaps |
Landing Gear | Metal retract landing gear |
Material | Fiberglass, Balsa, Oracover wings coverage |
Build time | 16 hours |
Radio requise | 6 channels minimum |
Recommended pilot skill level | Intermediate, Advanced |