Related Products
Key Features
For Podcasting,
Conferencing, and Music
Record to Computer,
Tablet, or Phone
3.5mm Headphone Jack
with Headphone Amp
Broadcast-Quality 192
kHz/24-Bit Audio
Cardioid Polar Pattern
Minimizes Room
Gain & Mute Controls
Robust Metal Build
Quality
Includes Desktop Stand
Includes USB Cables
& Pop Filter
Synco
CMIC-V2 Overview
Whether you're recording
podcasts, voice-overs, or songs, you can secure yourself a quality sound at a
wallet-friendly cost with the Synco CMic-V2. This small-diaphragm USB
microphone delivers a smooth, yet articulate sound and is well suited to
streaming and conferencing applications. The small form factor and durable
metal chassis means the V2 is ready to go anywhere the sound is, while the
built-in audio to digital converter lets you record straight to mobile devices
and computers at a sampling rate up to 192 kHz with a 24-bit resolution.
A 3.5mm output jack lets
you monitor through headphones in real time, and a pop filter is supplied to
reduce plosive sounds for better recordings. The mic also includes a desktop
stand, a USB Type-A cable, and a USB Type-C cable.
For Your Computer
The Cmic-V2 is well
suited for use with Mac or Windows computers, and a USB Type-A cable is
supplied.
For Your Mobile Device
With the included USB
Type-C cable, the mic works handily with Android devices, so you can record on the
go.
Cardioid Polar Pattern
The mic's cardioid polar
pattern picks up less sound from the sides and rear and improves isolation of
the desired sound source in front of the capsule. This makes the mic well
suited to voice-over, conferencing, and podcasting applications.
High-Resolution Analog
to Digital Converter
The mic's built-in A/D
converter offers sample rates and resolutions up to 192 kHz / 24-bit, ensuring
high-quality audio capture.
3.5mm Headphone Jack
Monitor your sound
privately by using the 3.5mm headphone jack. Just plug in your headphones and
adjust the volume knob.
Useful Controls
A gain knob controls the
mic level; a handy mute switch is also provided.
Simple to Set Up
Just mount the mic on
the included stand, plug the mic into the USB port on your mobile device or
computer with the appropriate included cable, and you're ready to get to work.
The mic runs off your device's power, so there's no need to plug it into a
wall.
Synco CMIC-V2 Specs
Primary Applications | Studio Recording, Podcast, Web-Streaming, Recording to Mobile Device |
Form Factor | Desktop / Stand/Boom Mount |
Intended Sound Sources | Vocals, Instrument |
Sound Field | Mono |
Operating Principle | Pressure Gradient |
Capsule | 1 x Electret Condenser |
Polar Pattern | Cardioid |
Orientation | Side Address |
Circuitry | Solid-State |
High-Pass Filter | None |
Gain Adjustment | Yes |
Indicators | 1 x Green/Red Single LED (Mute, Status) |
On-Board Controls | Gain/Sensitivity, Headphone Volume, Mic Mute |
Windscreen | Built-In |
Frequency Range | 20 Hz to 20 kHz |
Impedance | 2.2 Kilohms |
Sensitivity | -36 dB at 1 kHz |
Signal-to-Noise Ratio | 90 dB |
THD | 0.05% |
Output Connectors (Analog) | None |
Output Connectors (Digital) | 1 x USB Type-A Female |
Headphone Connector | 1 x 1/8" / 3.5 mm |
Cable Length | 5.9' / 1.8 m |
Wireless Connectivity | None |
Bluetooth | None |
A/D Conversion | 24-Bit |
Sample Rate | 192 kHz |
Operating System Support | Android, Windows, macOS/OS X |
Available Port | USB (Interface Unspecified) |
Bus Power | USB |
Operating Voltage | 5 V |
Operating Current Consumption | 125 mA |
Color | Black |
Mounting | 5/8"-27 Female, Mic Clip/Stand Adapter, Tabletop (Included) Desktop Stand (Included) |
Included Case | None |
Included Filters | Pop Filter |
Construction Material | Metal |
Dimensions | ø: 1.9 x L: 6.1" / ø: 47 x L: 156 mm |
Weight | 15.2 oz / 431 g |