• Trainer .60~.91 /15cc
  • Trainer .60~.91 /15cc

Trainer .60~.91 /15cc

  •  
  • Brand: Phoenix
  • Availability: In Stock
  • Product Code: 11620
  • 39.000 KD

 

This plane is a well designed for .91-15cc size trainer for beginner pilots. It has sturdy all balsa/ply wood construction and is very stable in flight. Bigger wing and bigger wing area helps give a more stable flight. 3 degree wing dihedral gives a good balance flight stability and agility.

All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to seperately purchase the nitro engine and radio system, and can fly this plane after 1-2 hours of installation.



 

Technical data

 

Wingspan: 1883mm (74.1 in)

Length: 1444mm (56.8 in)

Flying weight: 3500-4200 gr

Wing area: 64.7 dm2

Wing loading: 62g/dm2

Wing type: Naca airfoils

Covering type: V-kote film

Spinner size: Plastic 58mm (included)

Radio: 6 channel minimum (not included)

Servo: 7 standard servo: 2 aileron; 2 flap; 1 elevator; 1 rudder; 1 throttle (not included)

Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included)

Servo mount: 21mm x 42 mm

Propeller: suit with your engine

Engine: .91/15cc / 2-stroke (not included)

Motor: brushless out runner

Gravity CG: 95-100 mm (3.7-3.9 in) Back from  the leading edge of the wing, at the fuselage

Control throw Ailerons: Low: 8mm up/down, 10% expo; High: 10mm up/down, 10% expo

Control throw Elevators: Low: 8mm up/down, 12% expo; High: 10mm up/down, 12% expo

Control throw Rudder: Low: 25mm right/left, 15% expo; High: 40mm right/left, 15% expo

Experience level: Beginer

Plane type: Trainer

 

RECOMMENDED MOTOR AND BATTERY SET UP            

 

Motor: Rimfire.60 (not included)

Lipo cell: 6 cells / 4000 – 5500mAh (not included)

Esc: 60-100A (not included)