Related Products
SPECIFICATIONS:
Wingspan | 1500mm (59.1in) |
Length | 1663mm (65.5in) |
Weight | 3.5kg (7.7 lb) |
Turbine Engine | SW60 6KG brushed / SW60B 6KG brushless (required & not included) |
Cruising speed | 250 km/h (For reference only) |
Flying time | 5 mins (full throttle) (For reference only) |
Wing area | 34.28 dm2 |
Wing load | 189.6 g/dm2 (For reference only) |
Main material | 20 times EPO |
Painting surface | matte paint |
Suitable experience level | □Zero basis □Beginner □Intermediate ■Advanced |
KIT Assembly difficulty | □☆10mins □★☆30mins ■★★60mins(For reference only) |
Suitable for ambient temperature | 0℃~40℃ |
Radio System | 8 channel (required & not included) |
Control System | MFC-2085 (required & not included) |
Servos(required & not included) | 25g×2 Metal gear with 480mm lead (left & right ailerons forward) |
Recommended Battery | 2S,7.4V,1800~2000mAh×2,LiPo with T type plug(required & not included) |
Ailerons | Yes |
Flaps | Yes |
Elevator(Horizontal tail) | Yes |
Rudder(Vertical tail) | Yes |
The smoke system | Selective configuration (not included) |
LED lights system | Selective configuration (not included) |
Electromagnetic brake system | Selective configuration (not included) |
Reinforced gyro | Selective configuration (not included) |
Packaging / Size | Packing Box + Outer Box(Card mark)/132.5×46×39.5(cm) |
CG (Center of Gravity) | 170mm from the leading edge of the Main Wing |
Landing Gears | Metal electric retractable hydraulic landing gear×3(required & not included) |
Battery Charger | LiPo battery charger (required & not included) |
PACKAGE INCLUDES:
- Fuselage×1
- Left Wing×1
- Right Wing×1
- Left Horizontal Stabilizer×1
- Right Horizontal Stabilizer×1
- Vertical Stabilizer×1
- Nose×1
- Cockpit canopy×1
- Main wing carbon tube L=598mm external diameter 16mm×1
- Horizontal Stabilizer carbon tube L=500mm external diameter 6mm×1
- Sticker×1
- Capping board×1
- Accessories Bag 1 ×1
- Pull rod (1.8×91mm)×2(Put the ball head and the ball head, the aileron steel wire)
- Pull rod (1.8×80mm)×2(Put the ball head and the ball head, the flap steel wire)
- Pull rod (1.8×65mm)×2(Put the ball head and the ball head, the Horizontal Stabilizer/Vertical Stabilizer steel wire)
- Pull rod (1.8×31mm)×1(Load the ball head, the front landing gear and the steel wire)
- Pull rod (1.8×12mm)×1(Load the ball head, the nose landing gear and the steel wire)
- Screw (PA4×30mm)×8 (Landing gear)
- Screw (PWA2×8mm)×2 (Nose plate servo fixed)
- Screw (PB2.5×8mm)×8 (Fixed wing line)
- Screw (PM2×10mm)×14 (Lock the self locking nut and fix the head of the rod)
- Left lamp cover×1
- Right lamp cover×1
- Accessories Bag 2 ×1
- Tinfoil (50×360mm)×5
- Nylon cable ties×5
- Magic tape cable ties×1
- Nylon cockpit buckle×1
- Metal clasp of engine cover×1
- Accessories Bag 3 ×1
- Screw (HM3×35mm)×4 (Nose)
- Screw (HM3×14mm)×2 (Wing)
- Screw (HM3×10mm)×2 (Wing)
- Screw (HA3×14mm)×4 (Engine)
- Screw (HA3×10mm)×4 (Tail nozzle)
- Screw (HA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)
- Accessories Bag 4 ×1
- L type 3mm inner six corner board hand×1
- Screw (HM3×35mm)×4 (Nose Spare)
- Screw (HM3×14mm)×2 (Wing Spare)
- Screw (HM3×10mm)×2 (Wing Spare)
- Screw (HA3×14mm)×4 (Engine Spare)
- Screw (HA3×10mm)×4 (Tail nozzle Spare)
- Screw (HA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer Spare)
- 3M double-sided adhesive×1
- Manual×1
REQUIRES:
- SW60B 6KG brushless Turbine Engine (required & not included)
- 8 channel radio system (radio & receiver)(required & not included)
- 2S,7.4V,1800~2000mAh×2,LiPo with T type plug (required & not included)
- LiPo battery charger (required & not included)
- Landing gear (required & not included)
- MFC-2085 Control System(required & not included)
- Servos (required & not included)
- General landing gear control system (not included)
- All wire (not included)
- Tail nozzle
- Tank