• Synco G2A2 2.4G Wireless Mic
  • Synco G2A2 2.4G Wireless Mic

Synco G2A2 2.4G Wireless Mic

  • 60.000 KD

 

Quality Dual Wireless Microphone SYNCO G2(A2)

The SYNCO G2(A2) is a dual wireless microphone. It comes from G1(A2) and is reborn with a display to show all main indicators. It continues processing the input audio via patented technology and sending clean, clear audio based on 2.4GHz digital transmission technology. With 1 receiver and 2 transmitters, G2(A2) records two sound sources at the same time, applicable to a wide range of content creations.

 


New TFT Display & One More Transmitter Make G2(A2) a Well-deserved Plus

The SYNCO dual wireless microphone system G2(A2) distinguishes itself from G2(A1) by having the other transmitter to achieve the recording of 2-person dialogue and the flexibility of output modes, and differs from G1(A2) by a true-color TFT display on both transmitter and receiver to make each key figure such as recording mode and battery status, readable under different light intensities.

 

Algorithm 2.0 Enhances Transmission of Stability & Security

The SyncoderTM Encrypted Transmission Algorithm 2.0 enhances the signal stability of the digital microphone system within 492ft/150m (Line-Of-Sight) and 164ft/50m (Non-Line-Of-Sight) effective range. It runs the Frequency Hopping Spread Spectrum (FHSS) technique to detect the location on it’s own intuitive and then by itself turns to the optimal frequency so that no signal conflicts would occur. This also helps protect privacy and reduce interference.

 

Integrated Signal Processing Brings Little Latency Output

The Digital Signal Processor (DSP) chip in the professional dual wireless microphone system optimizes the signal from input to output directly. The full synchronization of signal capture, processing, and delivery is a guarantee of the almost zero latency transmission and quality sound production, perfect for immediate use and great for live broadcast.

 

3-in-1 Quick Charging Supports Each Continued Recording

The 3-in-1 charging solution allows the charging of this 2 channel wireless microphone (2TX+1RX) at the same time with one power source. It takes only 40 min to get the system 50% powered and 1 hour to reach 80%. The capacity-expanded battery supports 8-hour continued working if fully charged.

 

Small Features Run to Make Big Differences

A button is set to mute the system for a while when it comes to team communication, device setup, etc., rather than completely turning off the system. Find this function also in mini wireless microphone G1T/L.

 

The low cut, gain control, and real-time monitoring function to give a wider range of adjustment, allowing the microphone system to work in more conditions.

 

Pocket Mic Gets Invisible but Audible Effect

Mobile content creators would like this dual channel wireless microphone system. The transmitter and receiver each weighs only 39g and is 52*42*17mm sized, very easy to be concealed and very inconspicuous in most recording scenarios.

 

 

Specifications

 

Transmitter (TX )

 

Wireless Transmission Digital 2.4GHz

RF Frequency Band 2400-2483.5MHz

Frequency Response 20Hz-20KHz

Working Distance 492ft/150m (LOS area) / 164ft/50m (NLOS area)

Mounting       Pocket Clip

Audio Input 1/8" / 3.5mm TRS Mic Input

Audio Input Level 1V (0dBV)

Power Requirements 3.3V-4.7V

Battery Type Built-in Lithium Battery, 500mAh

Battery Charging Time 1.5h

Battery Life 8h

Display TFT Screen

Dimensions  52×42×17mm

Material          Plastic

Weight           39g

 

Receiver (RX)

 

Wireless Transmission Digital 2.4GHz

RF Frequency Band 2400-2483.5MHz

Approximate RF Sensitivity -81dBm

Working Distance 492ft/150m (LOS area)  / 164ft/50m (NLOS area)

Mounting Pocket Clip

Number of Audio Channels 2

Audio Output 1/8” / 3.5mm TRS Mic Output ,  1/8“ / 3.5mm TRS Headphone Output

Gain 0-5 Level

Audio Output Level Line Out: 1V; Monitoring: 25-30mW

Power Requirements 3.3V-4.7V

Battery Type Built-in Lithium Battery, 500mAh

Battery Charging Time 1.5h

Battery Life 8h

Display TFT Screen

Dimensions  52×42×17mm

Material          Plastic

Weight           39g

 

Microphone

 

Form Factor Built-in/External Mic

Sound Field Mono

Polar Pattern Omnidirectional

Frequency Range 50Hz-20KHz

Sensitivity -40dB (±3 dB, re 1V/Pa at 1KHz)

Max. SPL 135dB SPL (at 1KHz)

Write a review

Note: HTML is not translated!
    Bad           Good