Related Products
Pavo360, the newest
generation of 360 FPV quadcopter, generated by BETAFPV, has superb performance
in its recording, flying performance, stability, and design. The drone comes
with landing gear, protecting the camera lens when the quadcopter lands on the
surface, giving the Pavo360 ability to land anywhere. The ultra-thin and flat
frame design made sure the drone is completely invisible when recording a video
with the SMO360 panoramic camera.
Bullet
Points
The Pavo360 is the first
360 FPV drone with landing gear generated by BETAFPV. Compared with X-Knight
360 FPV Quadcopter, it protects the camera lens when the quadcopter takes down
from air to surface, the Pavo360 is able to land on most flat surfaces.
Both analog and HD
Digital VTX versions come with Toothpick F722 AIO 35A FC, 2204-2400KV motor
& Gemfan D76 5-Blades props, this highly efficient propulsion system lays
the foundation for powerful and stable flight.
Equipped with a newly
developed Pavo360 frame, which is made of PA12 material, it has higher abrasion
resistance, toughness, and shows excellent impact resistance in drop &
impact tests.
The ultra-thin and flat
frame design with SMO 360 Camera (not included) makes it possible to record and
enjoy the 360 videos without any unseen areas. Pavo360 is perfectly called an
invisible drone.
There are two versions
for Pavo360 FPV Quadcopter. Both versions support the SMO360 Camera. Please
note that the Pavo360 camera mount is suitable for the SMO360 Camera only and
other cameras can not be installed. We highly recommend buying BETAFPV SMO 360
Camera together.
BETAFPV SMO
360 Camera
A high-degree ultralight
action panoramic camera designed for Pavo360 FPV Drones! Developed by BETAFPV
using Insta360 technology, SMO 360 camera only weighs 55g and is perfectly
fitted for Pavo360 FPV drones. The distance between the 2 lenses is 40mm,
giving more room to the drone height. Meanwhile, with the FlowState
stabilization function, pilots can shoot panoramic video and get an
ultra-smooth and stable video, which makes the SMO 360 camera the best choice
for pilots in search of high-quality 360 videos with FPV drones!
The Pavo360 drone set
does not come with the SMO 360 Camera. Therefore, to better enjoy the Pavo360
FPV quadcopter, we highly recommend buying BETAFPV SMO 360 Camera together.

HD Digital
& Analog VTX
Caddx Polar Vista Camera
is an HD digital FPV camera with excellent performance. It is lightweight, only
28g (Camera and VTX). The camera has a large wide camera angle. The video
quality reaches 720p / 60fps. Low delay HD image transmission and brilliant
night photography are the highlights of it as an FPV camera. Together with
Pavo360's unique frame design and strong propulsion system, the camera can give
full play to FPV racing and bring you a hearty flight experience.
The Caddx Ratel is a
great camera choice for both night flights as well as during the day! Equipped
with a high-quality 1/1.18" HDR sensor, it provides up to 0.0001
Sensitivity of lux. It is very versatile in that you can switch between PAL and
NTSC video and also between 4:3 and 16:9 video formats. Latency is super low at
only 8ms.
A02 5.8G VTX is a lightweight, small size, and high-quality 25-800mW VTX, it offers a selectable 25/200/500/800mW output power for extreme range FPV flight. With 800mW output power, pilots can fly drones up to 1100 meters away to explore more possibilities and fun.
Landing Gear
New and incredible
design for the Pavo360. BETAFPV efforts to improve the durability, performance,
and creativity of drones. With the landing gear, which protects the camera lens
when the quadcopter takes down from air to surface, the Pavo360 is able to land
on most flat surfaces.
Note: Although the
Pavo360 equips with landing gear that is designed for protecting the SMO 360
camera lens, further protection is necessary. Strongly recommend buying lens
guard together.
After binding, you can
control the extension or retraction of the landing gear on the 8th channel
toggle switch (default settings) of your transmitter. This function setting is
available to be changed on your transmitter or flight controller.
Flight controller
setting for landing gear
Open Betaflight
Configurator and connect the flight controller. Enable Expert mode.
Select Configuration and
enable SERVO_TILT
Go to Servos tab on the left list of the Betaflight Configurator.
- Change the channel for landing gear. The default channel is A4 on Servo 0.
Finally, enter the CLI commands via Betaflight configurator.
resource SERVO 1 A08
resource LED_STRIP 1 NONE
save
Note: Only the Servo 0 is available. Other servos like Servo 1, 2, or 3 are not active. Please do not set the channel on other servos. Otherwise, the landing gear will not work.
Pavo360 Frame Kit
This frame kit is a new, ultra-thin, and flat frame design for Pavo360, which perfectly invisible the drones when recording a video. With the material of high-quality carbon fiber, the frame is not only secured and well built but also weighs light. Response very fast with F722 AIO Brushless FC 35A(BLHeli_S) and 2204-2400KV Motor. Pilots will enjoy a flight experience with Pavo360.

Wiring Diagram for
Electronic Parts
Below is the connection
diagram for the HD Digital VTX version.
Click here to download
the CLI for Pavo360 FPV Quadcopter.
Below is the connection diagram for the Analog VTX version.
Click here to download
the CLI for Pavo360 FPV Quadcopter.
Note: The remote recording and power cables for
SMO 360 camera are not soldered on FC board when the the factory. Please solder
it if you want to use this function.
SMO 360
Camera Mounting Instruction
The SMO 360 Camera is
designed for Pavo360 quadcopter. Pilots can remove the top plate cover and
directly install it on the drone.
Motors &
Props
Pavo360 analog VTX and
HD Digital VTX version come with 2204-2400KV motor & Gemfan D76 5-Blades
props, these 2 configurations achieve a perfect dynamic balance, which gives
the drone more flexible and longer flying time. Pilots can enjoy powerful and stable
flights with less noise.

Specification
Item: Pavo360 FPV
Quadcopter
Motor: Black 2204-2400KV
(6S)
Power connection: XT30
double-end aircraft model power connector, red and black wire plus subboard
Propeller: transparent
grey GF D76-5B
Flight Controller: F7 6S
AIO 35A Toothpick Flight Controller
Battery: 3S 850mAh 75C
battery
FPV Camera&VTX (HD
digital version): Caddx Polar Vista Kit
FPV Camera&VTX
(Analog version): Caddx Ratel+A02 800MW
FPV Camera tilt angle:
0-60°
Weight: 326g
Wheelbase: 168mm
Receiver: PNP/TBS
Crossfire receiver
Flight time: Smooth
flight about 5 minutes
Package
1 * Pavo360 FPV
Quadcopter (Without SMO 360 Camera)
2 * CW Gemfan D76
5-Blades Propellers
2 * CCW Gemfan D76
5-Blades Propellers
1 * Pavo360 Sticker
2 * 3S 850mAh 75C XT30
Battery
Specification
Item: Pavo360 FPV
Quadcopter
Motor: Black 2204-2400KV
(6S)
Power connection: XT30
double-end aircraft model power connector, red and black wire plus subboard
Propeller: transparent
grey GF D76-5B
Flight Controller: F7 6S
AIO 35A Toothpick Flight Controller
Battery: 3S 850mAh 75C
battery
FPV Camera&VTX (HD
digital version): Caddx Polar Vista Kit
FPV Camera&VTX
(Analog version): Caddx Ratel+A02 800MW
FPV Camera tilt angle:
0-60°
Weight: 326g
Wheelbase: 168mm
Receiver: PNP/TBS
Crossfire receiver
Flight time: Smooth
flight about 5 minutes