Related Products
Features:
- Construction: Built-up balsa and plywood
- Covering: Pre-applied heat shrink film, color scheme is mostly white on the fuselage and wings with red, yellow, and blue accents with red wheel pants
- Wings: Two-piece wood, must be joined before installation
- Radio Compartment: Plywood reinforced, easily accessible over wing
- Cowling: Painted fiberglass
- Canopy: Clear, single
- Wheel Pants: Painted fiberglass
- Cockpit features: Detailed and painted pilot figure
- Landing gear: Pre-bent 3/16" (4mm) aluminum with 2-1/4" (57mm) treaded rubber main wheels and one 1" (25mm) rubber tail wheel with pre-bent 0.078" (2mm) thick wire
- Dual aileron servos: Yes, standard size and torque required
- Hardware: Hinges, wing bolts and all other required fasteners included
- Motor Mount: Nylon, with engine mounting hardware
Includes:
Prebuilt and pre-covered wings fuselage and tail section aluminum main landing gear, tailwheel wire, nylon adjustable engine mount, main and tail wheels, pre-bent pushrods, hardware package, fiberglass cowling and wheel pants, clear canopy, pilot figure, decals, photo-illustrated instructions,
Requires:
Engine: .46 cu in (7.5 cc) 2-stroke OR .53 cu in (8.7cc) 4-stroke
Muffler: Standard type included with engine
Radio: Four channel
Servos: Five, 42 oz/in torque minimum (2-ailerons, 1-elevator, 1-rudder, 1-throttle)
Servo Extension: One 6" (152mm) for ailerons
Y-Harness: One for aileron servos
Misc. Items: 2" (51mm) spinner, 1/4" foam rubber padding, 3' medium fuel tubing, fuel filter, propeller, building and field equipment
Technical Specifications:
Wingspan: 53.1" (1350mm)
Flying Weight: 6.1lbs (2780g)
Length: 53.9" (1380mm)
Airfoil: Fully-symmetrical, mid wing
Center of Gravity: 4.1" (105mm) Back from the wing's leading edge at the fuselage sides.
Control Throws-
Ailerons: Up & Down 0.40" (10mm)
Elevator: Up & Down 0.59" (15mm)
Rudder: Right & Left 1.19" (30mm)