Enjoy Ya Hala Offers Online and in Store till 31 of March!
The XtremeAir Sbach 342
is a German high performance two-seat aerobatic and touring monoplane designed
by Philipp Steinbach with Albert Mylius and built by XtremeAir GmbH of
Hecklingen
Phoenix’s Sbach 342 is
naturally slower but is engineered to perform equally thrilling maneuvers!
scale-like model able to perform flat spin, knife edge and many other difficult
aerobatics. The Sbach is expertly handcrafted from balsa and plywood using only
epoxy and CA glues. You can fly this plane after few hours of installation. All
the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You
only need to separately purchase the nitro engine and radio system.
Technical
data
- Wingspan: 1663mm (65.5
in)
- Length: 1638mm (64.5
in)
- Flying weight:
4700-5200 gr
- Wing area: 56 dm2
- Wing loading: 85g/dm2
- Wing type: Naca
airfoils
- Covering type: Genuine
ORACOVER®
- Gear type: Aluminum
Hi-grade for main gear and spring wire for tail gear (included)
- Spinner size: Plastic
70mm (included)
- Radio: 4 channel
minimum (not included)
- Servo: 6 standard
hitorque servo: 2 aileron; 2 elevator; 1 rudder; 1 throttle (not included)
- Recommended receiver
battery: 4.8-6V / 1200-2000mAh NiMH (not included)
- Servo mount: 21mm x 42
mm
- Propeller: suit with
your engine
- Engine: .120 /
2-stroke or .120/4-stroke glow engine (not included)
- Motor: brushless
outrunner 2000-2400 W, 450 KV (not included)
- Gravity CG: 115 mm
(4.5in) Back from the leading edge of
the wing, at the fuselage
- Control throw
Ailerons: Low: 12mm up/down, 10% expo; High: 15mm up/down, 10% expo
- Control throw
Elevators: Low: 12mm up/down, 12% expo; High: 15mm up/down, 12% expo
- Control throw Rudder:
Low: 30mm right/left, 15% expo; High: 45mm right/left, 15% expo
- Experience level:
Intermediate
- Plane type: Scale
Aerobatic
RECOMMENDED MOTOR AND
BATTERY SET UP
- Motor: RIMFIRE .120
(not included)
- Lipo cell: 6-12 cells
/ 4000 – 5500mAh (not included)
- Esc: 80-100A (not
included)
Feature
- Capable of both
precise and extreme 3D aerobatics
- Designed for
compatibility with both GP and EP flight
- Genuine Oracover
covering
- Bolt-on two-piece wing
for easy transport and setup at the field
- Removable canopy for
easy change lipo battery and set up radio
- Extremely lightweight
laser-cut all-wood construction
- Durable
factory-painted fiberglass cowl
- Prepainted pilot
figure, preinstalled in cockpit
- All hardware included