Checkout and enjoy Ya Hala Offers Online and in Store till 31 of March!
This plane is a well
designed for .91-15cc size trainer for beginner pilots. It has sturdy all
balsa/ply wood construction and is very stable in flight. Bigger wing and
bigger wing area helps give a more stable flight. 3 degree wing dihedral gives
a good balance flight stability and agility.
All the hardware are
included (servo wire, fuel tank, wheel/landing gear, etc). You only need to
seperately purchase the nitro engine and radio system, and can fly this plane
after 1-2 hours of installation.
Technical data
Wingspan:
1883mm (74.1 in)
Length:
1444mm (56.8 in)
Flying
weight: 3500-4200 gr
Wing
area: 64.7 dm2
Wing
loading: 62g/dm2
Wing
type: Naca airfoils
Covering
type: V-kote film
Spinner
size: Plastic 58mm (included)
Radio:
6 channel minimum (not included)
Servo:
7 standard servo: 2 aileron; 2 flap; 1 elevator; 1 rudder; 1 throttle (not included)
Recommended
receiver battery: 4.8-6V / 800-1200mAh NiMH (not included)
Servo
mount: 21mm x 42 mm
Propeller:
suit with your engine
Engine:
.91/15cc / 2-stroke (not included)
Motor:
brushless out runner
Gravity
CG: 95-100 mm (3.7-3.9 in) Back from the
leading edge of the wing, at the fuselage
Control
throw Ailerons: Low: 8mm up/down, 10% expo; High: 10mm up/down, 10% expo
Control
throw Elevators: Low: 8mm up/down, 12% expo; High: 10mm up/down, 12% expo
Control
throw Rudder: Low: 25mm right/left, 15% expo; High: 40mm right/left, 15% expo
Experience
level: Beginer
Plane
type: Trainer
RECOMMENDED MOTOR AND BATTERY SET UP
Motor:
Rimfire.60 (not included)
Lipo
cell: 6 cells / 4000 – 5500mAh (not included)
Esc:
60-100A (not included)